I mentioned in my previous post about this project that I am using an existing stock of poplar plywood.

My stock of birch plywood

However, I remembered today that this wood is actually birch plywood.  I had purchased this wood about 4-5 years ago in a quantity large enough to build a set of bookshelves in the den of our previous house.  Luckily I had no time to start this project due to the birth of the triplets in 2004.  When we moved in 2005, the wood moved with us, and has been parked in my workshop ever since.  I used a large quantity of it for the beds I built for the kids this year, and since there is much remaining, the coat center will also be primarily made of this wood.

So, the cuts are mostly made, and I have begun cutting the dadoes and rabbets I’ll need to fit the top and bottom to the sides, as well as to fit the dividers and center shelf in place.  That process has not been completed, and there is much left to do.

Also mentioned previously was my intention to fit the coat hook board to the shelf box using a sliding dovetail.  Once I saw the bottom piece, though, I changed my mind.  Instead I will use pocket screws, since they need not be seen by anyone as they’ll be in the back of the board against the wall.  I know not everyone cares for pocket screws, but I think this is a place that calls for their strength.  Flame on if you have an opinion.

I am unlikely to have any shop time until the new year (Saturday) since I’m back in the office on Monday, and New Year’s Day will likely be spent at my parents’ house across town for a much delayed Christmas.

Until then, I have a few other things to post that may be of interest.  Enjoy!

The problem: My kids are too short to hang their coats up on the hanger bar in the coat closet.  Plus, they are unable to keep track of such items as library books.

The first solution: Put a set of coat hooks behind the front door at a height the kids can reach.  This has been an improvement, with the kids finally able to take responsibility for their coats, hats and gloves.  But it needs more…

The final solution: A set of shelves and cubbies for their hats and gloves, and also larger cubbies for library books.  Books have been hard to keep track of, since the kids have many of their own, and also visit the library on a regular basis.  Lately, the library books have become mixed in with their own, and this has been a problem.

The design: It’s a simple bos with some dadoes to fit the shelves, back and dividers into.  I’m not sure yet, but I think the goal with this project, as with many of my recent projects, will be to use up some of the large amount of poplar plywood stock I have had around for years.

The shelf area of the coat center

I will face frame it with some solid wood, and paint the whole thing white to match the foyer.  The board with the coat hooks will be attached to the bottom using a dovetail groove.  I’ll have to practice this on some scrap.  Finally, this will be hung on the wall using a french cleat.  I chose this method in order to achieve the most flexibility as the kids grow, because I imagine I’ll want to raise this unit higher as they grow taller.

I have attached a Google Sketchup (free 3-D modeling tool download) file that is coat-center Sketchup drawing for this project.  If you download it and take a close look, you’ll see that this exposes my inexperience with the tool.  I find it difficult to use, to the point of wanting to abandon it for pencil and paper.  But, I see its potential, and will give it more time.  Also note that I have yet to show the attached coat hooks at the bottom.  I’ll update that later and post it here.

The width was chosen to precisely fit the width of the foyer wall behind my front door, and the number of cubbies directly relates to the number of kids I have.  Your mileage may vary.  If so, you can edit the Sketchup drawing all you want.

I actually have a deadline on this.  My wife has asked that this be complete by the time the kids go back to school the week of January 5th, 2009.  so, the bad news is I have pressure.  The good news is I should have plenty of shop time to get this done.

Updates to follow!